Milford, Connecticut

Milford, Connecticut Milford, Connecticut

What is the Water Quality in Milford, Connecticut?

Compared to other US cities over 50,000, Milford water quality ranks in the middle range for contamination excluding Lead.

Most of their 24 contaminants have cancer-causing attributes. Chloroform is at extremely high levels: 84x health guidelines.

Let’s look closer at what’s in Milford water.

What’s in Milford water?

Here are the top 5 chemical compounds in your water and what health issues they can potentially cause:

  1. Bromodichloromethane – Potential effect: Cancer
  2. Chloroform – Potential effect: Cancer
  3. Hexavalent Chromium – Potential effect: Cancer
  4. Haloacetic acids (HAA5) – Potential effect: Cancer
  5. Total trihalomethanes – Potential effect: Cancer

These are five of the 24 contaminants analyzed by the Environmental Working Group (ewg.org).

12 of these contaminants are rated as exceeding EWG Health Guidelines.

Does Milford have Lead contamination?

Yes, Milford has lead in its water. The most recent Lead samples collected in 2019 showed concentrations up to 1.0 parts per billion.

The legal limit for lead is 15 parts per billion. Being well-below this level is a good thing.

Concentrations between 3.8 ppb and 15 ppb put a formula-fed baby at risk of elevated blood lead levels. Read more about the symptoms of Lead in water.

There is no safe level of lead for humans.

The good news is that 99.99% of the lead can be filtered out.

See the What Can You Do? section below to learn how to filter out contaminants.

Where does Milford’s water come from?

Milford’s water comes from the Milford Harbor – Frontal Long Island Sound watershed.

10 of the 12 water sources in the Milford Harbor – Frontal Long Island Sound watershed are in Impaired or Unknown condition. These include:

  • Indian River
  • Milford Harbor and Gulf Pond
  • Race Brook
  • Silver Brook
  • Wepawaug River

Ideally, a water source would be rated in Good condition. Sections of Indian River and the gulf near Milford are rated in good condition.

Learn more from How’s My Waterway

See below for what you can do to improve Milford’s water.

Conclusion – What Can You Do?

Information about water quality in Milford can be surprising and downright scary.

But there’s no reason to lose hope. There are things you can do in your home as well as things you can do at a community level.

In Your Home:
Take Control of Your Water with Berkey Filters

  • Use Berkey filters with activated carbon to filter out at least 77.3% of contaminants in your drinking water.
    • Berkey filters can also remove up to 99.99% of Lead in Milford water.
    • Brita can filter 12 of the 24 contaminants and Lead depending on the filter.
    • Note: We may receive a commission if you decide to purchase filters through links on this page.
  • To filter out 21 of the 24 contaminants, consider a Reverse Osmosis water filtration system for your house.
    • These are typically more expensive than pitchers to purchase, but are much more effective.
    • They have the benefit of filtering out heavy hitters like:
      • 1,4-Dioxane
      • Bromodichloromethane
      • Chromium (hexavalent)
      • Chromium (total)
      • Fluoride
      • Nitrate
      • Nitrite
      • Strontium

In Your Community:

Contact your local government officials and put pressure on them to invest in cleaner waterways and upgraded city water filtration and treatment.

Go to: https://www.ci.milford.ct.us/ to find contact information for your local officials.

Water Quality in Other Connecticut Cities

Connecticut Water Quality Page

Sign In

Register

Reset Password

Please enter your username or email address, you will receive a link to create a new password via email.